NOIV1SN025KA
Sensor Configuration
This device contains multiple configuration registers.
Some of these registers can only be configured while the
sensor is not acquiring images (while register 192[0] = 0),
while others can be configured while the sensor is acquiring
images. For the latter category of registers, it is possible to
distinguish the register set that can cause corrupted images
(limited number of images containing visible artifacts) from
the set of registers that are not causing corrupted images.
These three categories are described here.
Static Readout Parameters
Some registers are only modified when the sensor is not
acquiring images. Reconfiguration of these registers while
images are acquired can cause corrupted frames or even
interrupt the image acquisition. Therefore, it is
recommended to modify these static configurations while
the sequencer is disabled (register 192[0] = 0). The registers
shown in Table 16. Table 16 should not be reconfigured
during image acquisition. A specific configuration sequence
applies for these registers. Refer to the operation flow and
startup description.
Table 16. STATIC READOUT PARAMETERS
Group
Clock generator
Image core
AFE
Bias
LVDS
Addresses
32
40
48
64–71
112
Description
Configure according to recommendation
Configure according to recommendation
Configure according to recommendation
Configure according to recommendation
Configure according to recommendation
Sequencer mode selection
192
?
?
?
?
Rolling shutter enable
triggered_mode
slave_mode
nzrot_xsm_delay_enable
All reserved registers
Keep reserved registers to their default state, unless otherwise described in the re-
commendation
Dynamic Configuration Potentially Causing Image
Artifacts
The category of registers as shown in Table 17 consists of
configurations that do not interrupt the image acquisition
process, but may lead to one or more corrupted images
during and after the reconfiguration. A corrupted image is an
image containing visible artifacts. A typical example of a
corrupted image is an image which is not uniformly exposed
The effect is transient in nature and the new configuration
is applied after the transient effect.
Table 17. DYNAMIC CONFIGURATION POTENTIALLY CAUSING IMAGE ARTIFACTS
Group
Black level configuration
Sync codes
Datablock test configurations
Addresses
128–129
197[8]
129[13]
130–135
144–150
Description
Reconfiguration of these registers may have an impact on the black-level calibration
algorithm. The effect is a transient number of images with incorrect black level com-
pensation.
Incorrect sync codes may be generated during the frame in which these registers
are modified.
Modification of these registers may generate incorrect test patterns during a transi-
ent frame.
Dynamic Readout Parameters
It is possible to reconfigure the sensor while it is acquiring
images. Frame-related parameters are internally
resynchronized to frame boundaries, such that the modified
parameter does not affect a frame that has already started.
Some reconfiguration may lead to one frame being
blanked. This happens when the modification requires more
than one frame to settle. The image is blanked out and
training patterns are transmitted on the data and sync
channels.
However, there can be restrictions to some registers as
shown in Table 18.
http://onsemi.com
18
相关PDF资料
NP100P04PDG-E1-AY MOSFET P-CH -40V MP-25ZP/TO-263
NP100P04PLG-E1-AY MOSFET P-CH -40V MP-25ZP/TO-263
NP100P06PDG-E1-AY MOSFET P-CH -60V MP-25ZP/TO-263
NP100P06PLG-E1-AY MOSFET P-CH -60V MP-25ZP/TO-263
NP109N04PUJ-E1B-AY MOSFET N-CH 40V MP-25ZP/TO-263
NP109N055PUJ-E1B-AY MOSFET N-CH 55V MP-25ZP/TO-263
NP110N03PUG-E1-AY MOSFET N-CH 30V MP-25ZP/TO-263
NP110N04PDG-E1-AY MOSFET N-CH 40V MP-25ZP/TO-263
相关代理商/技术参数
NOIV1SE1300A-QDC 功能描述:图像传感器和彩色传感器 VITA 1300 1.3 Mpx 150FPS Globl Shutter RoHS:否 制造商:Avago Technologies 类型:Color Sensors 工作电源电压:2.5 V 封装 / 箱体: 图象大小: 颜色读出:Color 最大工作温度:+ 70 C 最小工作温度:- 25 C 封装:Reel
NOIV1SE1300A-QXC 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:VITA 1300 1.3 Megapixel 150 FPS Global Shutter CMOS Image Sensor
NOIV1SE1300A-XDC 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:VITA 1300 1.3 Megapixel 150 FPS Global Shutter CMOS Image Sensor
NOIV1SE1300A-XXC 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:VITA 1300 1.3 Megapixel 150 FPS Global Shutter CMOS Image Sensor
NOIV1SE2000A-QDC 功能描述:IC IMAGE SENSOR 2.3MP 52LLC RoHS:是 类别:传感器,转换器 >> 图像,相机 系列:* 标准包装:480 系列:- 象素大小:6.7µm x 6.7µm 有源象素阵列:768H x 488V 每秒帧数:52 电源电压:3.3V 类型:CMOS 成像 封装/外壳:48-QFP 供应商设备封装:48-QFP 包装:托盘 请注意:* 配用:4H2105-ND - HEADBOARD FOR KAC-004014H2104-ND - KIT EVAL FOR KAC-00401 其它名称:4H20954H2095-NDKAC-00401-CBC-LB-A0
NOIV1SE5000A 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:VITA 5000 5.3 Megapixel 75 FPS Global Shutter CMOS Image Sensor
NOIV1SE5000A-QDC 功能描述:图像传感器和彩色传感器 VITA 5000 5.3 Mpx 75FPS Global Shutter RoHS:否 制造商:Avago Technologies 类型:Color Sensors 工作电源电压:2.5 V 封装 / 箱体: 图象大小: 颜色读出:Color 最大工作温度:+ 70 C 最小工作温度:- 25 C 封装:Reel
NOIV1SN025KA-GDC 功能描述:IC IMAGE SENSOR 25MP 355PGA RoHS:是 类别:传感器,转换器 >> 图像,相机 系列:* 标准包装:480 系列:- 象素大小:6.7µm x 6.7µm 有源象素阵列:768H x 488V 每秒帧数:52 电源电压:3.3V 类型:CMOS 成像 封装/外壳:48-QFP 供应商设备封装:48-QFP 包装:托盘 请注意:* 配用:4H2105-ND - HEADBOARD FOR KAC-004014H2104-ND - KIT EVAL FOR KAC-00401 其它名称:4H20954H2095-NDKAC-00401-CBC-LB-A0